Car overrevving at starting
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Gear shift › Car overrevving at starting
Fault diagnosisCar overrevving at starting
CAR OVERREVVING AT STARTING
It seems that the clutch is slipping on departure
| Results of the tests | ||||
| 0 | CARRY OUT CLUTCH PARAMETER CALIBRATION USING THE EXAMINER | All OK | Problems met | Operation |
|---|---|---|---|---|
| In active diagnosis carry out the calibration of the clutch parameters through the ''clutch self-calibration enablement'' | Continue to Step 1 | The calibration is not successful | Continue in accordance with the instructions for the diagnostic equipment | |
| 1 | CHECK THAT THE FAULT IS NO LONGER PRESENT | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Continue to Step 2 | |
| 2 | CLUTCH PUSH ROD ADJUSTMENT CHECK | All OK | Problems met | Operation |
Carry out the clutch push rod check as described in See Test | Continue to Step 3 | The position is outside the permitted range | Restore the correct position Tighten to torque | |
| 3 | AFTER THE CLUTCH PUSH ROD ADJUSTMENT | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | The fault persists | Contact Technical Service for further information on the problem | |
Parts & tools for this job For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.