Workshop Manuals Factory service & repair

Alfa Romeo GT Factory Service Manual (2003-2010)22 · Fault diagnosis

22 · Diagnostics

Clutch noisy

Make: Alfa Romeo
Model: GT Factory Service Manual
Year: 2003–2010
Section: Noisy'' / vibrations › Clutch noisy

‹ Prev Noise'' gearbox / round bends Next › Climate control system noisy'' / (in the engine compartment)

Fault diagnosisClutch noisy

CLUTCH NOISY

When the clutch pedal is operated there is a noise (creaking)

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	With the engine idling and the gear lever in neutral, press the clutch pedal. Then, with the engine running and the handbrake applied, engage first gear and release the clutch	Continue to Step 1	The noise disappears with the clutch pressed	Continue according to the instructions for the See table See table S01 ENGINE KNOCK
		Continue to Step 1	The noise disappears/increases when the clutch is pressed	Continue to Step 1
1	CHECK THRUST BEARING	All OK	Problems met	Operation
	Check the thrust bearing: it should not be worn	Continue to Step 2	Bearing fault	Replace the bearing Op. 1820A30
2	CLUTCH CHECK	All OK	Problems met	Operation
	Check the condition of the clutch plate and springs.	Continue to Step 3	Clutch plate or springs faulty	Replace the clutch plate Op. Op. 1810A20 CLUTCH - R + R
	Check the condition of the clutch plate and springs.	Continue to Step 3	No fault found, but defect persists	Continue according to the instructions for the See table See table S20 GEARBOX DIFFERENTIAL UNIT NOISY''/ / GENERAL
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis

‹ Prev Noise'' gearbox / round bends Next › Climate control system noisy'' / (in the engine compartment)

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.