Engine whilstling / services belt noisy
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Noisy'' / vibrations › Engine whilstling / services belt noisy
ENGINE WHILSTLING / SERVICES BELT NOISY
A high frequency noise is heard from the engine, whose intensity varies with the number of revs
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
Check the condition of the auxiliary shaft drive belt and check that the tension is correct. See if the whistling stays constant as more electrical loads are conneced. | Continue to Step 1 | Belt worn. | Replace the belt Op. | |
| Tension incorrect | Adjust belt tension | |||
| The whistling noise increases. | Continue to Step 1 | |||
| 1 | ALTERNATOR CHECK | All OK | Problems met | Operation |
1.9 JTD 16V 2.0 JTS | Check that the alternator is working properly, in particular
| Continue to Step 2 | Defective voltage regulator | Replace the voltage regulator Op. |
| Connections not correct | Restore the connections | |||
| 3.2 V6 | Check that the alternator is working properly, in particular:
| Continue to Step 2 | Defective voltage regulator | Replace the voltage regulator Op. Op. 5530A24 ALTERNATOR VOLTAGE REGULATOR - R R WITH ALTERNATOR REMOVED |
| Connections not correct | Restore the connections | |||
| 2 | CHECK AUXILIARY SHAFT BELT | All OK | Problems met | Operation |
Check whether the whistling disappears when the belt is disconnected. Do not let the engine run for long with the belt disconnected | Continue to Step 3 | The whistling disappears: | Continue to Step 3 | |
| The whistling remains constant | Continue to Step 4 | |||
| 3 | AIR CONDITIONER COMPRESSOR CHECK | All OK | Problems met | Operation |
| Check the air conditioner air conditioner compressor is working properly. | Continue to Step 4 | Air conditioner compressor faulty | Repair or replace the compressor Op. Op. 5040A20 AIR CONDITIONER COMPRESSOR - R+R - INCLUDES FLUID LEVEL CHECK AND TOP UP IF NECESSARY | |
| 4 | CHECK BELT TENSION | All OK | Problems met | Operation |
| Check the condition of the belt tension bearings | Continue to Step 5 | Fixed belt tensioner fault | Replace the fixed belt tensioner Op. Op. 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R | |
| Mobile belt tensioner fault | Replace the mobile belt tensioner Op. Op. 1092G14 ENGINE COMPONENT SINGLE BELT MOBILE TENSIONER - R + R | |||
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job For 2003 Alfa Romeo GT
- PARTEngine gasket setSearch: Alfa Romeo GT 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.