Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)13 · Steering
13 · Steering & suspension

Heat exchanger pipe - r+r

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Power steering › Heat exchanger pipe - r+r
SteeringHeat exchanger pipe - r+r

HEAT EXCHANGER PIPE - R+R

Operation 4130B52 · POWER STEERING HYDRAULIC SYTEM

1.8 T.SPARK, 2.0 JTS

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R

Proceed with removal

Proceed with removal

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.

Proceed with removal

Proceed with removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

1. Disconnect the rapid attachment coupling from the return pipe from the heat exchanger to the power steering fluid reservoir, heat exchanger side.

2. Disconnect the quick-release fitting on the return pipe from power steering box to heat exchanger, heat exchanger side.

Op. 7055B54 UNDER-ENGINE GUARD - R R

3. Undo the nut (3a) and remove the bracket (3b) for the heat exchanger fastening pipe.

4. Remove the heat exchanger pipe (4a) after releasing it from the fastening (4b).

Op. 7210E10 R.R. FRONT BUMPER

Collect the power assisted steering fluid in a suitable container.

HEAT EXCHANGER PIPE - R+R

Refitting

Refit the heat exchanger pipe in its seating.

Refit the heat exchanger pipe mounting bracket in its seating and tighten the nut.

Connect the quick-release fitting on the return pipe from power steering box to heat exchanger, heat exchanger side.

Connect the rapid attachment coupling on the return pipe from the heat exchanger to the power steering fluid reservoir, heat exchanger side.

Proceed with refitting

Op. 7210E10 R.R. FRONT BUMPER.

Proceed with refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with refitting

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with refitting

Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.

Proceed with refitting

Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY.

Remove the car from the ramps.

1.9 JTD 16V

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R

Proceed with removal

Proceed with removal

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.

Proceed with removal

Proceed with removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.

Proceed with removal

1. Disconnect the rapid attachment coupling from the return pipe from the heat exchanger to the power steering fluid reservoir, heat exchanger side.

Op. 7055B54 UNDER-ENGINE GUARD - R R

2. Disconnect the quick-release fitting on the return pipe from power steering box to heat exchanger, heat exchanger side.

3. Undo the nut (3a) and remove the bracket (3b) for the heat exchanger fastening pipe.

Op. 7210E10 R.R. FRONT BUMPER

4. Remove the heat exchanger pipe (4a) after releasing it from the fastening (4b).

Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R.

Collect the power assisted steering fluid in a suitable container.

HEAT EXCHANGER PIPE - R+R

Refitting

Refit the heat exchanger pipe in its seating.

Refit the heat exchanger pipe mounting bracket in its seating and tighten the nut.

Connect the quick-release fitting on the return pipe from power steering box to heat exchanger, heat exchanger side.

Connect the rapid attachment coupling on the return pipe from the heat exchanger to the power steering fluid reservoir, heat exchanger side.

Proceed with refitting

Op. 1084C40 CONVOGLIATORE ARIA PER RADIATORE RAFFREDDAMENTO OLIO MOTORE - S.R..

Proceed with refitting

Op. 7210E10 R.R. FRONT BUMPER.

Proceed with refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with refitting

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with refitting

Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.

Proceed with refitting

Op. 0010T71 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY.

Proceed with refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Remove the car from the ramps.

Parts & tools for this job For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.