Audi Workshop Service and Repair Manuals

• ‒ Remove dust and pollen filter
• ‒ Remove glove compartment.

=> Inner Body Assembly; Repair group 68

• ‒ → Reach into the intake housing and turn temperature sensor -A- 90°.
• ‒ Reach between air conditioner and A-pillar and remove temperature sensor from the intake with connector -C- attached.

Notes:

• ◆ If the temperature sensor cannot be turned, carefully spray silicone spray onto contact surface of rubber grommet -B-.
• ◆ Checking =>Electrical check, Page 01-128.