- Running gear
- Body
- Power unit
- Fuel supply system - diesel engines
- Motronic injection and ignition system (4-cyl.)
- 4-cylinder Engine (2-valve), Mechanical Components
- Motronic injection and ignition system (4-cyl. turbo)
- 4-Cylinder engine (5-valve), Mechanics
- Simos injection and ignition system (4-cylinder)
- 4-Cylinder engine (2-valve), Mechanics
- Motronic Injection and Ignition System (4-cyl.) 08.97ä
- TDI Injection and Glow Plug System (4-cyl.) 08.99 >
- Diesel Direct Injection and Glow Plug System (TDI 4 cyl.) >07.99
- Motronic fuel injection and ignitionsystem (4-cyl. turbo)
- TDI®injection and glow plug system (4-cyl. unit injector)
- Motronic injection and ignition system (4-cylinder turbo)
- Self diagnosis, V.A.G Inspection Service
- Mixture preparation system, electronic inj.,Gas
- Servicing Motronic injection system
- Safety precautions
- Rules for cleanliness
- Technical data
- Overview of fitting locations
- Air cleaner - exploded view
- Removing and installing air filter element
- Checking wiring and components with test box V.A.G 1598/31
- Removing and installing engine control unit with and without protective housing
- Exhaust emissions warning lamp K83 in dash panel insert
- Checking exhaust emissions warning lamp K83
- Checking idling speed
- Checking system pressure, fuel pressure regulator and residual pressure
- Checking injectors
- Dismantling and assembling fuel rail with injectors - exploded view
- Removing and installing injectors
- Checking injection quantity and spray pattern of injectors; checking for leaks
- Checking fuel pump relay J17 and activation
- Checking air mass meter G70
- Checking intake system for leaks (unmetered air)
- Checking Lambda control function
- Checking Lambda probe and Lambda control before catalytic converter
- Checking ageing of Lambda probe before catalytic converter
- Checking Lambda probe heater Z19 for Lambda probe G39
- Checking Lambda probe and Lambda control after catalytic converter
- Checking Lambda probe 1 heater after catalytic converter Z29 for Lambda probe after catalytic converter G130
- Removing and installing Lambda probe
- Checking solenoid valve 1 for activated charcoal filter N80
- Checking electronic engine power control (electronic throttle)
- Checking auxiliary signals
- Vacuum system layout
- Ignition system, glow plug system
- 4-cyl. Diesel Direct Injection Engine (TDI), Mech. Components
- 4-cyl TDI®-Engine, Mechanical Components
- 4-Cylinder engine (2-valve, roller rockers), Mechanics
- Fuel supply system, petrol engines
- Removing and installing air mass meter
- 4-cylinder 1.8 ltr. 5-valve turbocharged engine (110-132 kW), mechanics
- 4-cylinder 1.8 ltr. 5-valve turbocharged engine (154-165 kW), mechanics
- Power transmission
- Vehicle electrics
- Heating, ventilation, air conditioning system