audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing gearbox mounting > < Securing gearbox to assembly stand

A3 Mk2

Exploded view - assembly mountings
   
Exploded view - assembly mountings
1 - Bolt
q   Gearbox support to gearbox
q   Renew
q   60 Nm + 90°
2 - Bolts
q   Pendulum support to gearbox
q   Renew
q   For correct version, refer to → Electronic parts catalogue
l  Gearbox with thread inserts → Fig.
q   50 Nm + 90°
l  Gearbox without thread inserts → Fig.
q   40 Nm + 90°
q   Tightening sequence → Fig.
3 - Engine support
q   Different versions → Electronic parts catalogue
4 - Bolt
q   Engine support to engine
q   Tightening torque → Rep. Gr.10
5 - Engine mounting
6 - Bolt
q   Engine mounting to body
q   Tightening torque → Rep. Gr.10
7 - Connecting bracket
8 - Bolt
q   Connecting bracket to engine mounting
q   Tightening torque → Rep. Gr.10
9 - Bolt
q   Connecting bracket to body
q   Tightening torque → Rep. Gr.10
10 - Bolt
q   Engine mounting to body
q   Tightening torque → Rep. Gr.10
11 - Bolts
q   Engine mounting to engine support
q   Tightening torque → Rep. Gr.10
12 - Pendulum support
q   Removing and installing → Chapter
13 - Bolt
q   Pendulum support to subframe
q   Renew
q   100 Nm + 90°
q   Tightening sequence → Fig.
14 - Bolt
q   Gearbox mounting to gearbox support
q   Renew
q   60 Nm + 90°
15 - Bolt
q   Gearbox mounting to body
q   Renew
q   40 Nm + 90°
16 - Gearbox mounting
q   Removing and installing → Chapter
q   Secure to gearbox support
17 - Bolt
q   Gearbox support to gearbox
q   Renew
q   60 Nm + 90°
18 - Bolt
q   Gearbox support to gearbox
q   Renew
q   60 Nm + 90°
19 - Gearbox support
q   Removing and installing → Chapter

   
Gearbox with thread inserts (e.g. “HeliCoil”) for securing pendulum support
  Note
t  Gearboxes manufactured from 28 05 7 onwards have thread inserts (e.g. “HeliCoil”) in the bolt holes for the pendulum support.
t  These can be recognised by the shoulder on the first thread turn -arrow-.
t  Different tightening torques → Item
t  Select correct securing bolts from → Electronic parts catalogue.
  N34-10980
Installing pendulum support
–  Renew bolts.
–  First secure pendulum support to gearbox (-2- and -3-), then on subframe -1-.
  A10-1578

Removing and installing gearbox mounting > < Securing gearbox to assembly stand