| Checking open Haldex coupling for function on vehicles with manual gearbox |
| t
| Oil level of Haldex coupling OK |
| t
| Checking oil level in Haldex coupling → Chapter. |
| t
| Correct engine control unit and ABS control unit installed (check coding and control unit identification number). |
| –
| Place vehicle on lifting platform. |
Caution | For safety reasons it is essential that the wheels do not touch the ground when the vehicle is on the lifting platform. |
| Carry out test with care to avoid damage. |
|
| –
| Depress clutch pedal all the way, select 1st gear and release clutch carefully. |
| All four wheels must turn. |
| The rear wheels must stop turning and the front wheels must continue to turn. |
| l
| If the rear wheels do not turn: |
| The Haldex coupling is open; function is OK. |
| l
| If the rear wheels turn: |
| The Haldex coupling is closed. Possible cause of fault: |
| t
| Main pressure regulating valve sticking |
| t
| Mechanical fault in Haldex coupling |
| t
| Four-wheel drive control unit -J492- at rear final drive defective |
| t
| Handbrake warning switch -F9- defective |
|
|
|
