A4 Mk3
Note
|
| 1 - | Self-locking bolt |
| q | 12 Nm |
| 2 - | Actuator motor for electronic parking brake and handbrake |
| q | Removing and installing control unit for electronic parking brake and handbrake → Chapter |
| q | Removing and installing actuator motor → Chapter |
| 3 - | Seal |
| q | Always renew |
| 4 - | Self-locking bolt |
| q | 35 Nm |
| q | Always renew |
| q | When loosening and tightening, counter-hold on guide pin |
| 5 - | Spacer bracket |
| 6 - | Brake hose |
| q | Connection to brake caliper, 20 Nm |
| q | Do not disconnect brake line when changing brake pads |
| q | Make sure that the locking lugs are fitted properly in the bracket |
| q | Do not twist hose when installing |
| 7 - | Brake caliper housing |
| q | Do not disconnect brake hose when changing brake pads |
| q | Servicing brake calipers |
| q | The brake carrier can be mounted together with the brake caliper |
| q | Detaching and attaching → Chapter |
| q | Renewing → Chapter |
| 8 - | Brake carrier with guide pins and protective caps |
| q | Replacement carriers are supplied assembled and with sufficient grease on guide pins |
| q | If protective caps or guide pins are damaged, renew using repair kit. Use grease sachet supplied to lubricate guide pins. |
| q | The brake carrier can be mounted together with the brake caliper |
| q | Detaching and attaching → Chapter |
| 9 - | Brake pads |
| q | Wear limit → Chapter |
| q | Always renew on both sides of axle |
| q | Removing and installing → Chapter |
| q | Checking pad thickness → Booklet405 |
| q | The brake carrier can be mounted together with the brake caliper |
Note| The brake pads must be seated between the two retaining lugs on the pad retainer to help maintain the required clearance between pads and disc |
| 10 - | Pad retainer |
| q | Always renew when changing pads |
Note| The brake pads must be seated between the two retaining lugs on the pad retainer to help maintain the required clearance between pads and disc |
| 11 - | Wheel bolts |
| q | Fitting wheels → Wheels and tyres; Rep. gr.44 |
| 12 - | Bolt |
| q | 5 Nm |
| 13 - | Brake disc |
| q | Wear limit → Chapter |
| q | Removing and installing → Chapter |
| q | Always renew on both sides of axle |
| q | Allocation of brake discs → Chapter |
| 14 - | Hexagon bolts |
| q | 10 Nm |
| 15 - | Splash plate for brakes |
| q | Removing and installing → Chapter |
| 16 - | Bolt |
| q | 100 Nm + 90° |
| q | Renew |
| 17 - | Bolts |
| q | 100 Nm + 90° |
| q | Renew |