5 Series E34 525td (M51) TOUR
Fit special tool 11 3 360 to chain tensioning rail and press in
chain tensioner.
Remove special tool 11 3 340 and slowly relieve load on chain
tensioner.
Tighten down camshaft gear.
Tightening torque,
refer to Technical Data 11 31 4AZ
Replace sealing ring. Install screw plug and tighten down.
RA Removing and installing cylinder head (M51)
BMW AG - TIS
23.01.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
