bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_sealing Or Transmission Oil Sump|Page 701 > < 2 RA Removing And Installing_sealing Or Transmission Oil Sump
Page 2
background image

Version with oil filler pipe:

Take out oil dipstick.

Caution!

Oil dipstick is locked:

Tilt handle to unlock oil dipstick for removal.

Pour in ATF.

Top up ATF using special tool 24 0 080.

Volume: approx. 3.0 liters.

Check oil level in selector lever setting "P" or "N" at engine idle
speed and top up if necessary.

Car must be stationary on a level surface.

Never wipe off oil dipstick with a cloth which loses lint.

Transmission-oil temperature is recorded by a temperature-
dependent resistor integrated in the transmission wiring harness.

Interrogate ATF temperature with MoDiC or Service Tester (refer
to Test Plan)

Take out oil dipstick and measure oil level. Compare measured
level with values in following table.

Oil Temperature

°

C

Oil Level = H in mm
Min.

30

3

RA  Removing and installing/sealing or transmission oil sump

BMW AG - TIS

23.01.2013  07:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_sealing Or Transmission Oil Sump|Page 701 > < 2 RA Removing And Installing_sealing Or Transmission Oil Sump