5 Series E34 525td (M51) TOUR
Install the drive pinion with new tapered roller bearings, but
without a clamping sleeve, to determine the correct thickness of
shim (X).
Install drive pinion in the rear bearing outer race.
Pull front taper roller bearing onto the drive pinion with special tool
23 1 300 in conjunction with a spacer bush.
Mount input flange.
By carefully tightening down the collar nut, adjust friction torque of
input taper roller bearing to 250 Ncm.
Caution!
When tightening down, keep checking friction torque with
special tool 00 2 000 at regular intervals.
RA Replacing bearing for input bevel gear (Type M) - final drive removed -
BMW AG - TIS
23.01.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
