5 Series E34 525td (M51) TOUR
Block Distance of Drive Pinion
Secure dial gauge in special tool 33 1 461.
Fit special tool 33 1 461 with dial gauge on special tool
33 1 462 and set dial gauge preload to zero.
Fit special tool 33 1 462 to drive pinion.
Install special tool 33 1 461 in housing.
Determine value Y:
Basic distance C = 11.50 mm
Gage thickness B = 9.50 mm
Examples for Determination of Correct Shim Thickness (X)
RA Replacing bearing for input bevel gear (Type M) - final drive removed -
BMW AG - TIS
23.01.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
