5 Series E34 525td (M51) TOUR
Install drive pinion with a new clamping sleeve (2).
Immerse shaft seal in final drive oil and drive in flush with special
tool 33 1 270 in conjunction with special tool 00 5 500.
Press-fit input flange to the input shaft using special tool
23 1 300 but do not tighten down.
The axial preload force of drive pinion bearings (5000 N) can be
determined with help of the friction torque.
Gradually tighten down input flange with collar nut, measuring
friction torque at regular intervals.
RA Replacing bearing for input bevel gear (Type M) - final drive removed -
BMW AG - TIS
23.01.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
