Allante V8-273 4.5L (1991)
Radiator Cooling Fan Motor: Symptom Related Diagnostic Procedures
Test C: Low Speed OK, No High Speed Right Fan
1. Disconnect Coolant Fan Relay 2. With the Ignition Switch in RUN measure the voltage from terminal 2 to ground at the harness connector.
^
If battery voltage is measured, go to step 2.
^
If battery voltage is not measured, check circuit 350 for an open.
2. With the Ignition Switch in RUN, measure the voltage between terminals 2 and 4 at the Coolant Fan Relay 2 harness connector.
^
If battery voltage is measured, go to step 3.
^
If battery voltage is not measured, check circuit 15O5 for an open.
3. Enter diagnostics and select PCM override ES08. Set diagnostic display to 01 and connect a test lamp between terminals 2 and 5 at the Coolant
Fan Relay 2 harness connector.
^
If test lamp does not light, check circuit 536 for an open.
^
If test lamp lights, check terminal contact at Coolant Fan Relay 2. If OK, replace Coolant Fan Relay 2.