Catera V6-3.0L VIN R (1997)
Tighten the cable retainer bracket screw until fully seated. DO NOT strip the cable retainer bracket screw.
5. Position the air inlet duct.
6. Install the air inlet duct screws.
Tighten
Tighten the air inlet duct screws until fully seated. DO NOT strip the air inlet duct screws.
7. Install the grille.
8. Install the left radiator cover.
9. Install the self-locking screw until fully seated.
10. Perform the following steps to install the hood release lever bracket to the A-Pillar mount:
10.1.Push the hood release lever bracket forward.
10.2.Snap the hood release lever bracket in place.
11. Lower the hood.