CTS V8-5.7L VIN P (2004)
3. Secure the liquid line into the bracket (1) on the strut tower.
4. Connect the liquid line to the evaporator.
5. Install the A/C quick connect clamp (1) on the line.
IMPORTANT: Squeeze the clamp together until you here it engage.
6. Engage the clamp.
7. Gently tug on the liquid line to ensure that the clamp is engaged.
8. Connect the liquid line at the condenser.
9. Install the retaining clip screw (1) to the A/C line.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten