SRX AWD V6-3.0L (2010)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Intake Manifold Replacement
Removal Procedure
1. Remove the power steering fluid reservoir upper bracket only.
2. Remove the power brake booster vacuum check valve and hose. Refer to Power Brake Booster Vacuum Check Valve and Hose Replacement
(LF1) (See: Brakes and Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair)Power Brake Booster Vacuum Check Valve and
Hose Replacement (LAU) (See: Brakes and Traction Control/Power Brake Assist/Vacuum Pump/Service and Repair).
3. Remove the coolant air bleed pipe. Refer to Engine Coolant Air Bleed Pipe Replacement (LF1) (See: Cooling System/Coolant Line/Hose/Service
and Repair)Engine Coolant Air Bleed Pipe Replacement (LAU) (See: Cooling System/Coolant Line/Hose/Service and Repair).
4. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Intake Manifold Cover Replacement).
5. Disconnect and remove the positive crankcase ventilation (PCV) tube (1) from the intake manifold and right camshaft cover.
