SRX AWD V6-3.0L (2010)
1. Install the NEW lower intake manifold gasket (3).
2. Install the lower intake manifold (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 2 lower intake manifold bolts (1) and tighten to 23 Nm (17 lb ft).
4. Install the fuel injector rail. Refer to Fuel Injector Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Injector/Service and Repair).
5. Install the upper intake manifold. Refer to Upper Intake Manifold Replacement (See: Upper Intake Manifold Replacement).
6. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill LF1) (See: Cooling System/Service and Repair/Cooling System
Draining and Filling (Static Fill))Cooling System Draining and Filling (GE 47716) (See: Cooling System/Service and Repair/Cooling System
Draining and Filling (GE 47716))Cooling System Draining and Filling (Static Fill LAU) (See: Cooling System/Service and Repair/Cooling
System Draining and Filling (Static Fill)).