SRX AWD V6-3.6L (2008)
Parking Brake Cable: Service and Repair
Park Brake Release Cable Replacement
Park Brake Release Cable Replacement
Removal Procedure
1. Remove the knee bolster. Refer to Knee Bolster Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair)Knee Bolster Replacement (Right Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair) .
2. Remove the park brake release handle mounting screws.
3. Remove the park brake release cable housing (3) from the park brake release handle assembly (1).
4. Remove the park brake release cable (2) from the park brake release handle assembly (1).
5. Remove the park brake release cable housing (2) from the park brake pedal assembly (1).
6. Remove the park brake cable (1) from the park brake pedal release lever (2).
7. Remove the park brake release cable from the vehicle.
Installation Procedure