SRX AWD V6-3.6L (2008)
1. Install the park brake cable (1) to the park brake pedal release lever (2).
2. Install the park brake release cable housing (2) to the park brake pedal assembly (1).
3. Install the park brake release cable (2) to the park brake release handle assembly (1).
4. Install the park brake release cable housing (3) to the park brake release handle assembly (1).
5. Install the park brake release handle assembly (1) to the knee bolster.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
6. Install the park brake release handle mounting screws.
Tighten the park brake release handle mounting screws to 2 N.m (18 lb in).
7. Install the knee bolster. Refer to Knee Bolster Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair)Knee Bolster Replacement (Right Hand Drive) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair) .