SRX AWD V6-3.6L (2008)
Air Duct: Service and Repair
Air Inlet Assembly Replacement (Left Hand Drive)
Air Inlet Assembly Replacement (Left Hand Drive)
Removal Procedure
1. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement (Left Hand Drive) (See: Body and
Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair)Instrument Panel Compartment Replacement (Right Hand Drive) (See:
Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair) .
2. Remove the closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side (Left Hand Drive) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Insulator Panel Replacement - Right Side (Right Hand Drive)
(See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .
3. Remove the upper air inlet assembly bolts (1).
4. Remove the lower right air inlet assembly bolt (1).
5. Slide the assembly to the right and then lower.
6. Disconnect the air inlet assembly electrical connector (1).
7. Rotate the air inlet assembly (1) and remove.
Installation Procedure