cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Air Inlet Assembly Replacement (Left Hand Drive)|Page 16113 > < Air Inlet Assembly Replacement (Left Hand Drive)|Page 16111
Page 1
background image

Air Duct: Service and Repair
Instrument Panel Outer Air Outlet Upper Duct Replacement - Left Side (Right Hand Drive)

Instrument Panel Outer Air Outlet Upper Duct Replacement - Left Side (Right Hand Drive)

Removal Procedure

1. Remove the instrument panel (I/P) retainer. Refer to Instrument Panel Retainer Replacement (Left Hand Drive)  (See: Body and Frame/Interior

Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Retainer Replacement (Right Hand Drive)  (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .

2. Disconnect the wiring harness from the air duct.

3. Remove the screws (1) that retain the air duct.
4. Remove the left air duct (2), by unsnapping the duct from the HVAC module.

Installation Procedure

1. Install the left air duct (2), by pressing down until you hear the tabs engage on the HVAC module.

Notice:  Refer to Fastener Notice  .

2. Install the air outlet duct screws (1).

Tighten the screws to 2 N.m (18 lb in).

3. Connect the wiring harness to the air duct.
4. Install the I/P retainer. Refer to Instrument Panel Retainer Replacement (Left Hand Drive)  (See: Body and Frame/Interior Moulding /

Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Retainer Replacement (Right Hand Drive)  (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .

Air Inlet Assembly Replacement (Left Hand Drive)|Page 16113 > < Air Inlet Assembly Replacement (Left Hand Drive)|Page 16111