SRX AWD V6-3.6L (2008)
Windshield Defroster Duct Replacement
Removal Procedure
1. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement (Left Hand Drive) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Carrier Replacement (Right Hand Drive) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .
2. Press in on the tab to release the defroster duct (1) from the HVAC module.
3. Remove the defroster duct (1).
Installation Procedure
1. Install the defroster duct (1).
2. Press down on the defroster duct (1) until you hear the tabs engage.
3. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (Left Hand Drive) (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair)Instrument Panel Carrier Replacement (Right Hand Drive) (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .
Rear Floor Air Outlet Duct Replacement - Left Side (Left Hand Drive)
Rear Floor Air Outlet Duct Replacement - Left Side (Left Hand Drive)