SRX AWD V6-3.6L (2008)
14. Remove the power steering cooler line to condenser retaining bolts.
15. Remove the condenser.
Installation Procedure
1. If replacing the condenser, add the specified amount of PAG oil directly to the condenser. Refer to Refrigerant System Capacities (See:
Specifications/Capacity Specifications) .
2. Install the condenser.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the power steering cooler line to condenser retaining bolts.
Tighten the bolt to 9 N.m (80 lb in).
4. Install a new O-ring to the condenser tube. Refer to O-Ring Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair) .
5. Connect the condenser tube to the condenser.