Brake Bleeding: Service and Repair (page 2 of 4)
- Make
- Chevrolet
- Model
- Aveo
- Engine
- L4-1.6L
- Year
- 2008
- Section
- Brake Bleeding
MaintenanceService and Repair · page 2 of 4
3. Disconnect the front brake lines at the master cylinder.
4. Allow the brake fluid to fill the master cylinder until it begins to flow from the front pipe connector port.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
5. Connect the front brake lines to the master cylinder.
Tighten the brake lines to 16 N.m (12 lb ft).
6. Slowly push and hold the brake pedal one time.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2008 Chevrolet Aveo 1.6L
- PARTBrake padsSearch: Chevrolet Aveo 2008 1.6L brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.