Front Alignment Specifications

Alignment: Specifications
Front Alignment Specifications

Camber Angle

Limits .............................................................................................................................................................................................................................. [4]
Desired ........................................................................................................................................................................................................................... [5]

Toe [3]

Individual .................................................................................................................................................................................................................... 0.05°
Total ............................................................................................................................................................................................................................. 0.1°

Caster [1] .......................................................................................................................................................................................................................... 3.3°

Ball Joint Wear ................................................................................................................................................................................................................... [2]

[1] - Not adjustable.
[2] - Refer to "Ball Joint Inspection" in "Front Suspension & Steering" section.  
[3] - Toe in (+);  toe out (-).  
[4] - Revised by a Technical Service Bulletin to following specifications: models built up to & including 8/15/95, -0.3° to +0.9°; models built after

8/15/95, -0.5° to +0.7°.

[5] - Revised by a Technical Service Bulletin to following specifications: models built up to & including 8/15/95, +0.3°; models built after 8/15/95, +0.1

°.