dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 2019 > < Component Tests and General Diagnostics|Page 2017
Page 172
background image

STEP 7. Check the harness wires between combination meter connector C-102 and battery.

NOTE:  After checking junction block connectors C-308 and C-310, joint connector C-141 and intermediate connector C-209, check the wires. If
junction block connectors C-308 and C-310, joint connector C-141 and intermediate connector C-209 are damaged, repair or replace them. Refer to
Harness Connector Inspection.

Q: Are the harness wires between combination meter connector C-102 and battery in good condition?

YES: There is no action to be taken.
NO: Repair or replace them. The security indicator light should illuminate, and the theft-alarm system should be armed normally.

Component Tests and General Diagnostics|Page 2019 > < Component Tests and General Diagnostics|Page 2017