Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)01 · 00 Introduction and technical data
01 · General

Electrical equipment (page 3 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Electrical equipment
00 Introduction and technical dataElectrical equipment · page 3 of 3

(*) Data obtained at an ambient temperature of 20°C.

The data in brackets refers to the starter motor fitted on the 1581 version with automatic transmission.

NOTE When overhauling it is not necessary to under the insulator between the commutator bars

STARTER MOTOR 1370 12V 12V 1581 16V 16V 1747 16V 16V 1998 20V 20V 1929 D D 1910 TD TD
M. Marelli
E80-12V-0,9 kW
(E80E-12V-1kW)		 M. Marelli
M70R-12V-1,4 kW
(with reduction gear)		 M. Marelli
E95RL-12V-2,2 kW
Voltage V 12
Nominal power kW 0,9 (1) 1,4 2,2
Rotation, pinion side clockwise
No. of poles 4 4
Field coil series series - parallel
Engagement free wheel
Operation solenoid
End float of armature shaft mm 0,1 ÷ 0,5 (0,15 ÷ 0,45) 0,15 ÷ 0,45
Data for bench test
Operating test (*):
current A 180 (200) 360 ÷ 380 600
speed rpm 1720 (2200) 1150 1400
voltage V 9,5 (9,8÷10) 8,15 7,9
torque developed daNm 0,37 (0,38) 1,30 1,6
Engagement test (*):
current A 324 (440) 680 ÷ 700 1110 ÷ 1150
voltage V 7,1 (7,6) 4,9 4,4 ÷ 4,6
torque developed daNm ≥0,97 (≥1,25) 3,11 ≥3,9
Free running test (*):
current A 40 (44÷48) 60 ÷ 80 120 ÷ 140
voltage V 11,4 (11,4÷11,5) 4,9 11
speed rpm 8500 ÷ 9000
(11400÷12300)		 4040 4500 ÷ 4750
Relay
Winding resistance (*) pull in Ω 0,30 ÷ 0,32 (0,32) 0,33 ÷ 0,37 0,23 ÷ 0,27
hold in Ω 1,2÷1,3 (1,09) 1,13 ÷ 1,27 0,93 ÷ 1,07
Lubrication
Internal splines and shaft bushes VS* SAE 10 W
Sleeve and intermediate disc TUTELA MR3

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.