Description (page 2 of 3)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range)
00 Introduction and technical dataDescription · page 2 of 3
| DESCRIPTION | 1242 16v 16v | 1998 20v 20v STEP A | |
|---|---|---|---|
| Values in mm | |||
| 14 Valve | Ø1 | 5.974 - 5.992 | 6.975 - 6.930 |
| Ø2 | 22.250 - 22.550 | 29.900 - 30.200 | |
| α | – | 45° 30' ± 5' | |
| Ø1 | 5.974 - 5.992 | 6.960 - 6.975 | |
| Ø2 | 22.250 - 22.550 | 25.900 - 26.200 | |
| α | – | 45° 30' ± 5' | |
| 14-13 Valve Valve guide |
0.030 - 0.066 | 0.032 - 0.065 | |
| 0.047 - 0.080 | |||
| 15 Internal valve spring | P1 | – | 11.08 - 12.07 daN |
| H1 | – | 29.5 | |
| P2 | – | 21.58 - 23.54 daN | |
| H2 | – | 20 | |
| 16 External valve spring | P1 | 22.5 daN | 27.7 - 29.43 daN |
| H1 | 31 | 34 | |
| P2 | 42.3 | 48.46 - 52.38 daN | |
| H2 | 23 | 24.5 | |
| Camshaft bearings 17a 17b |
Ø1 | 35.000 - 35.015 | – |
| Ø2 | 48.000 - 48.015 | – | |
| Ø3 | 49.000 - 49.015 | – | |
| Ø | – | 26.000 - 26.015 | |
| L | – | 19.250 - 19.330 | |
| Cam lift | 7.5 | 9 | |
| 7.5 | 9 | ||
| 12-17a Camshaft journals Cylinder head mounts |
Ø1 | 0.030-0.070 | – |
| Ø2 | 0.030-0.070 | ||
| Ø3 | 0.030-0.070 | ||
| 12-17b | radial | – | 0.030 - 0.070 |
| axial | – | 0.100 - 0.230 | |
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.