Description (page 3 of 3)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range)
00 Introduction and technical dataDescription · page 3 of 3
| 1242 16v 16v | 1998 20v 20v STEP A | ||
|---|---|---|---|
| DESCRIPTION | |||
| Values in mm. | |||
| 18 |
Ø1 | 35.045-35.070 | – |
| Ø2 | 48.045-48.070 | – | |
| Camshaft bearings in camshaft housing Ø3 |
49.045-49.070 | – | |
| 18 Tappet housings Ø |
28.400 - 28.421 | – | |
| 19 Tappet Ø |
28.354-28.370 | 32.959-32.975 | |
| 19-12 Tappet Bore in cylinder head |
– | 0.025-0.066 | |
| 19-18 Tappet - Bore in cylinder head extension |
0.046 - 0.051 | – | |
| 17-20 |
for timing | 0.45 | |
| check | Hydraulic tappets | ||
Original page
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.