Timing diagrams (page 2 of 3)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Engine (98 range)
00 Introduction and technical dataTiming diagrams · page 2 of 3
| Values in mm | |
|---|---|
| Engine lubrication system | forced circulation, via lobe pump with in-line cartridge filter |
| Oil pump | lobe gears |
| Pump driven | by crankshaft |
| Oil pressure relief valve | built into front crankshaft cover |
| between pump housing and driven gear | 0.080 - 0.186 |
| between the upper side of the gears and the pump cover | 0.025 - 0.056 |
| Full flow filter | cartridge |
| Insufficient oil pressure sender unit | electrical |
| Operating pressure at temperature of 100°C | 3.43 - 4.9 bar |
| Oil pressure relief valve spring | P1 6.27 - 7.06 daN |
| H1 36 |
Original page
Parts & tools for this job For 1995 Fiat Bravo
- PARTEngine gasket setSearch: Fiat Bravo 1995 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.