Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)01 · 00 Introduction and technical data
01 · General

Planned maintenance

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Planned maintenance (98 range) › Planned maintenance
00 Introduction and technical dataPlanned maintenance

Planned maintenance

Diagram showing the automatic tensioner and timing belt with callout number 1.
  1. Using a screwdriver, apply force to the automatic tensioner tab so that the tensioner is in the maximum tension position, then tighten the nut fixing the tensioner to the support.
Diagram showing the inlet and exhaust side pulleys and camshafts with spanner tool applied.
  1. Using spanner 1860831000, torque tighten the inlet and exhaust side pullies to the recommended figures.
    Remove the tools positioned for timing and locking the camshafts and rotate the crankshaft through two revolutions in its direction of rotation.
Diagram showing the tensioner with moving reference (1), fixed reference (2), and nut (3).
  1. Loosen the nut fixing the tensioner and ensure that the moving reference on the tensioner (1) coincides with the fixed reference (2), then tighten the nut fixing the tensioner to torque and proceed with the refitting of the components removed previously.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.