Planned maintenance

Planned maintenance

27 REPLACE POLLEN FILTER

1. To gain access to the pollen filter it is necessary to raise the seal shown in the diagram and then undo the bolts shown and remove the access flap for the pollen filter.

2. Release the side retaining springs in the pollen filter housing, extract it and proceed with replacing it.

NOTE Failure to replace the filter can considerably reduce the efficiency of the climate control system.
If the vehicle is often used in dusty or strongly polluted areas, advise the Customer of the need to replace the filter element more often; it should especially be replaced if a decrease in the flow rate of the air introduced into the passenger compartment is noticed.