Air conditioner
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Tightening torques (98 range) › Air conditioner
00 Introduction and technical dataAir conditioner
| PART | Thread | Tightening torques daNm |
ENGINE | ||
|---|---|---|---|---|---|
| 1242 | 1998 STEP A |
1910 | |||
| Screw with broad flange retaining front flexible block to rear subframe | M12×1.25 | 10.8 | ● | ● | ● |
| Screw with broad flange retaining rear flexible block to body | M12×1.25 | 10.8 | ● | ● | ● |
| Nut for stud retaining rear swinging arm to sub-frame | M16×1.5 | 15 | ● | ● | ● |
| Nut for screw retaining lower damper to suspension | M12×1.25 | 8.8 | ● | ● | ● |
| Screw retaining top of damper to mount | M10×1.25 | 6 | ● | ● | ● |
| Nut for pivot pin retaining rear hub | M22×1.5 | 28 | ● | ● | ● |
| Bolt retaining stabilizer bar to rear suspension arm | M10×1.25 | 5.6 | ● | ● | ● |
| Bolt retaining stabilizer bar support plates to rear suspension arm | M8 | 2.8 | ● | ● | ● |
| Wheel stud | M12×1.25 | 8.6 | ● | ● | ● |
| Nut for bolt retaining square lever to wishbone | M8 | 1.5 | ● | ● | ● |
AIR CONDITIONER
| Bolt retaining dehydrating filter inlet and outlet ducts | M6 | 0.55 | ● | ● | ● |
| Bolt retaining evaporator pipe to compressor | M6 | 0.55 | ● | ● | ● |
| Three-stage pressure switch fastener | M10x1 | 0.8 | ● | ● | ● |
| Nut retaining i.e. control unit | M6 | 0.55 | ● | ● | ● |
| Bolts and nuts retaining i.e. control unit. | M6 | 0.55 | ● | ● | ● |
Parts & tools for this job For 1995 Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.