00 Introduction and technical dataPedal unit
| PART |
Thread |
Tightening torques |
ENGINE |
| daNm |
1.242 16v |
1.998 20v STEP A |
1.910 JTD |
| Bolt retaining brace to differential end mount |
M12x1.25 |
8 |
|
● |
|
| Bolt retaining differential end flexible block to beam |
M8 |
3.6 |
● |
● |
● |
| Bolt retaining bracket to gearbox - gearbox end |
M10x1.25 |
5 |
|
● |
|
| Power unit reaction link retaining bolt |
M10 |
5 |
● |
|
|
PEDAL UNIT
|
|
Tightening torques |
ENGINE |
|
|
daNm |
1.242 16v |
1.998 20v STEP A |
1.910 JTD |
| Nut retaining accelerator pedal to pedal unit |
M6 |
0.5 |
● |
● |
● |
| Flanged nut retaining brake and clutch pedal unit mount to body |
M8 |
1.5 |
● |
● |
● |
| Broad-flanged bolt for automatic fittings retaining pedal unit to dashboard |
M8 |
2.6 |
● |
● |
● |
| Self-locking nut for retaining and adjusting clutch control cable on gearbox |
M6 |
0.44 |
● |
● |
● |
| Self-locking nut retaining brake and clutch pedal pivot pin to pedal unit |
M8 |
3 |
● |
● |
● |
EXTERNAL GEARBOX LINKAGE
|
|
Tightening torques |
ENGINE |
|
|
daNm |
1.242 16v |
1.998 20v STEP A |
1.910 JTD |
| Bolt retaining gear lever mount to floor pan |
M6 |
0.74 |
● |
● |
● |
| Screw retaining bottom selection and engagement rod to gear lever |
M8 |
2.8 |
● |
● |
● |
| Nut retaining intermediate return pin |
M8 |
1.5 |
● |
● |
● |
| Nut retaining ball heads to levers |
M8 |
1.5 |
● |
● |
● |
| Nut for bolt retaining selection idler to gearbox |
M8 |
1.5 |
● |
● |
● |
| Bolt retaining reverse pipe to gearbox |
M8 |
2.4 |
● |
● |
● |
| Nut retaining ball heads to selection lever |
M8 |
1.5 |
● |
● |
● |
01 General
