Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting injection pump on vehicle

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (1929 D) › Removing-refitting injection pump on vehicle
10 EngineRemoving-refitting injection pump on vehicle · page 1 of 3
View of the engine bay showing the air intake assembly and its mounting points indicated by arrows
Close-up diagram of the injection pump area with numbered callouts 1 through 6 indicating various connections and components

REMOVING-REFITTING INJECTION PUMP ON VEHICLE

Removing injection pump

  1. Unscrew the bolts indicated and remove air intake assembly with connection sleeve to air cleaner container.
  2. Remove the following parts from the pump:
    1. Fast idle cable.
    2. Accelerator cable.
    3. Electrical connection for engine stop solenoid (electrostop).
    4. Fuel delivery line.
    5. Fuel return line to tank.
    6. Fuel return line from injectors.
  3. Disconnect fuel delivery lines from injectors using tool 1852138000.
  4. Disconnect fuel delivery lines from injection pump to injectors.
Close-up of a hand using tool 1852138000 to disconnect a fuel line fitting, with arrows indicating the direction of movement
Close-up of hands disconnecting multiple fuel delivery lines from the injection pump, with arrows indicating the fittings being separated

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.