Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Paa00n bot

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1747 16v) › Paa00n bot
10 EnginePaa00n bot

PAA00N BOT

Diagram showing the front cross member area with arrows pointing to bolts securing the air inlet duct.
Diagram showing the vehicle battery and its mounting bracket in the engine compartment.

REMOVING-REFITTING POWER UNIT

Position the vehicle on a lift, disconnect the negative lead from the battery, remove the front wheels, then proceed as described below:

  1. Disconnect the air inlet duct acting on the bolts shown in the diagram, fixing it to the front cross member.
  2. Lift up the protective cover for the positive pole, then disconnect the relevant cable; undo the nut fixing the battery to the drip tray and remove it from the engine compartment.
  3. Remove the air inlet duct complete with flow meter acting on the bands shown in the diagram, taking caare to disconnect the relevant electrical connection.
  4. Undo the nuts fixing the cables shown in the diagram to the positive battery terminal.
Diagram of the air inlet duct and flow meter assembly with arrows indicating the retaining bands and electrical connector locations.
Diagram showing the positive battery terminal with arrows pointing to the nuts fixing the cables.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.