Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting radiator

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1929 D) › Removing-refitting radiator
10 EngineRemoving-refitting radiator
View of the engine bay showing the air intake shroud with arrows pointing to two bolts at the front.
Close-up view of coolant lines connected to the radiator with hose clamps.
Close-up view of the cooling fan and its electrical connector wiring.

REMOVING-REFITTING RADIATOR

  1. Disconnect battery negative lead, then remove air intake shroud by undoing bolts shown in figure.
  2. Disconnect lines shown in figure from radiator. Disconnect lower pipe first in order to drain coolant.
  3. Disconnect fan connections, then remove from engine bay by undoing retaining bolts.
  4. Remove bolts retaining radiator to front beam.
  5. Lift out radiator from engine bay.
View of the front beam area showing the mounting points for the radiator after it has been removed.
A person lifting the radiator assembly out of the engine bay.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.