Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting coolant pump

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting coolant pump (1581 16v) › Removing-refitting coolant pump
10 EngineRemoving-refitting coolant pump
Diagram showing the upper coolant hose connection near the expansion tank
Diagram showing the air intake line and fuel lines on the engine side

REMOVING-REFITTING COOLANT PUMP

  1. Drain the coolant by removing lower radiator outlet line.

Remove alternator-coolant pump drive belt as described in previous sections.

  1. Remove air intake line shown in figure.
  2. Disconnect fuel delivery and return lines. Remove support bracket (1) to facilitate removal.
  3. Remove power steering pump drive belt cover.
  4. Slacken tension in power steering pump drive belt, then remove pump fastenings and place to one side without disconnecting pipes.
Diagram showing the fuel delivery and return lines with a numbered callout (1) pointing to a support bracket
Diagram showing the power steering pump being removed from its mounting points

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.