Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Refitting coolant pump (page 5 of 5)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting cylinder head (1370 12v)
10 EngineRefitting coolant pump · page 5 of 5
Diagram showing exhaust pipe fastenings on the engine
Diagram showing the connection of the exhaust manifold to the engine block
Diagram showing the oil dipstick tube and valve cover area
  1. Disconnect exhaust pipe from fastenings as shown.
  2. Disconnect exhaust manifold.

Remove the auxiliary belt and timing belt as described in previous paragraphs, then proceed as follows.

  1. Remove oil dipstick.
  2. Remove the cylinder head with intake manifold using wrench 1852154000.
Diagram showing a wrench being used to remove bolts from the cylinder head; label reads 1852154000

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.