Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting cylinder head

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting cylinder head (1581 16v) › Removing-refitting cylinder head
10 EngineRemoving-refitting cylinder head · page 1 of 5

Removing-refitting cylinder head

Diagram showing screws on the air intake shrouds indicated by arrows
Diagram showing input and output sleeves of the coolant system
Diagram showing the air intake duct and oil vapour recovery line in the engine bay

REMOVING-REFITTING CYLINDER HEAD

  1. Remove air intake shroud by undoing screws shown in figure.
  2. Position a suitable container in order to recover the coolant and remove the two input and output sleeves shown in the figure, which carry coolant to and from the expansion tank.
  3. Remove air intake duct by undoing clips shown. Then remove from engine bay with oil vapour recovery line.
  4. Lift battery positive terminal protective cover and disconnect the lead. Unscrew bolt retaining battery to holder and then remove from engine bay.
  5. Remove cover of relay and fuse box.
Diagram showing the battery and its retaining bolt in the engine bay
Diagram showing a bolt indicated by an arrow near the relay and fuse box area

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.