Removing-refitting cylinder head

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting cylinder head (1747 16v) › Removing-refitting cylinder head

10 EngineRemoving-refitting cylinder head · page 1 of 4

REMOVING-REFITTING CYLINDER HEAD

Disconnect the negative battery lead, remove the auxiliary shaft drive belt and the timing drive belt as described in the previous paragraphs, then proceed as described below:

1. Drain the coolant acting on the special tap shown in the diagram.
2. Remove the air intake duct acting on the fixings shown in the diagram.
3. Remove the pipe shown in the diagram connected to the expansion tank.
4. Remove the radiator coolant inlet and out-

02 Engine