Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting radiator

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting radiator (1747 16v) › Removing-refitting radiator
10 EngineRemoving-refitting radiator
Diagram showing a clip and arrow indicating a fastener on the vehicle body near the radiator grille area.
Diagram of the engine bay showing arrows pointing to fixing bolts on the upper structural support bar.

REMOVING-REFITTING RADIATOR

  1. Disconnect the negative battery lead, then drain the coolant via the special tap shown in the diagram.
  2. Remove the air intake duct acting on the fixing bolts shown in the diagram.
  3. Remove the two coolant inlet and outlet pipes shown from the radiator.
  4. Disconnect the fan supply connections, undo the bolts fixing it to the radiator, then remove it from the vehicle.
  5. Undo the upper bolts and loosen the lower ones fixing the condenser to the radiator.
Diagram showing the coolant inlet and outlet pipes connected to the top of the radiator.
Diagram showing the cooling fan assembly with arrows pointing to its fixing bolts and electrical supply connections.
Diagram showing the condenser mounted in front of the radiator with arrows pointing to the upper and lower fixing bolts.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.