Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing-refitting water pump

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting radiator (1747 16v) › Removing-refitting water pump
10 EngineRemoving-refitting water pump
Diagram showing a wrench tool (1860831000) applied to the camshaft pulley on the inlet side of the engine.
Engine timing belt installation diagram with gear alignment
Two diagrams showing the removal and installation of protective shields around the timing belt area.

REMOVING-REFITTING WATER PUMP

Before proceeding with the removal of the water pump, remove the auxiliary shaft and timing drive belts as described in the previous paragraphs.

  1. Remove the camshaft pulley, inlet side using tool 1860831000.
  2. Remove the shields shown in the diagram.
  3. Remove the water pump acting on the fixing bolts.
  4. Refit the components removed previously tightening the camshaft pulley fixing bolt, inlet side to a torque of 11.8 daNm using tool 1860831000. Position and tension the timing and auxiliary shaft drive belts as described in the previous paragraphs.
Diagram showing the water pump being removed from the engine block.
Diagram showing a wrench tool (1860831000) tightening the camshaft pulley fixing bolt on the inlet side.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.