Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)03 · 18 Clutch
03 · Transmission

Thrust bearing

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Clutch operation › Thrust bearing
18 ClutchThrust bearing
Diagram showing the release lever and clutch assembly connection point
Diagram showing the release lever being pulled upwards away from the housing

P4A005C01

P4A005C02

Diagram showing a bolt or screw being removed from the side of the clutch housing with an arrow indicating direction

THRUST BEARING

  1. The thrust bearing should not show signs of sticking or noise during rotation or else it must be replaced.

FORK CONTROL SHAFT

Removing - refitting

  1. Remove the circlip for the release lever and remove the actual lever.
  2. Remove the upper bush.

NOTE The bush in question is replaced eachtime the clearance for the fork control shaft is too great.

  1. Remove the fork control shaft, releasing it from the lower housing.
  2. View of components removed
Diagram showing the fork control shaft being extracted from the lower housing
Exploded view of the removed components including the release lever, bushes, fork control shaft, and thrust bearing

P4A005C03

P4A005C04

P4A005C05

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.