Stall speed test

Stall speed test

This test serves to check the performance of the transmission and engine, and is conducted by measuring the maximum rpm that can be reached by the engine with the selector lever at position D and R.

The duration of the stall speed test must not exceed 5 seconds.

To conduct the stall speed test, proceed as follows:

• chock the vehicle by placing wedges under the wheels;
• apply the handbrake fully;
• start the engine and bring it up to temperature;
• press the brake pedal down hard with the left foot;
• move the selector lever to position D;
• press the accelerator pedal down fully with the right foot and quickly read the maximum speed reached by the engine.

Stall speed: 2300 ± 150 rpm

Repeat the sequence of operations, but moving the selector lever to position R.

Stall speed: 2300 ± 150 rpm