Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing - refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1370 12v) › Removing - refitting
21 Gearbox and differentialRemoving - refitting · page 1 of 6

Removing - refitting

Diagram showing gear selector rod (1), reversing lights switch (2), inhibition cable (3), earth cable (4) and clutch cable (5).
Diagram showing the head of the gear engagement flexible transmission cable and odometer connection.
  1. Disconnect the gear selector rod (1), disconnect the reversing lights switch (2), inhibition cable (3), earth cable (4) and clutch cable (5).
Diagram showing the starter motor secured to the gearbox.
  1. Disconnect the head of the gear engagement flexible transmission cable, disconnect the odometer connection then move the assembly aside in the engine compartment.
  2. Undo the top bolts securing the starter motor to the gearbox.
Diagram showing the steering tie-rod end being disconnected from the vertical link using tool 1847038000.
  1. Raise the ramps, undo the nut securing the steering tie-rod end, then using tool 1847038000 disconnect it from the vertical link. Repeat the procedure for the tie-rod end on the other side.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.