Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)04 · 21 Gearbox and differential
04 · Transmission

Removing - refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1581 16v) › Removing - refitting
21 Gearbox and differentialRemoving - refitting · page 1 of 4

Removing - refitting

21-27.

Diagram showing bolts securing a component to the front crossframe, indicated by arrows.
Diagram showing the air intake duct and oil vapour recovery pipe in the engine compartment.
Diagram showing the battery with protective cover on positive terminal and securing nut.
Diagram showing the fuse and relay box cover and its securing bolt.

REMOVING-REFITTING

Removing

Place the car on ramps, disconnect the battery’s negative terminal and remove the front wheels, then proceed as described below:

  1. Remove the air intake duct by undoing the bolts shown in the figure, securing it to the front crossframe.
  2. Remove the air intake duct by undoing the clips shown in the figure, then remove it from the engine compartment complete with oil vapour recovery pipe.
  3. Lift the protective cover of the battery’s positive terminal and disconnect the relevant cable; undo the nut securing the battery to the cage, then remove it from the engine compartment.
  4. Remove the fuse and relay box cover by undoing the bolt indicated.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.