Removing - refitting (page 4 of 4)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Removing-refitting (1581 16v)
21 Gearbox and differentialRemoving - refitting · page 4 of 4
- Remove the gearbox top bolts.
- Fit an appropriate support eyelet at the point shown in the figure, to hook the power unit onto during removal of the gearbox.
- Undo the nut securing the right wind-screen wiper arm after removing the pro-tective cap.
- Remove the right side cover of the anti-pollen filter by undoing the bolts indicat-ed, while the bolts securing the left cover must be slackened to allow the power unit support stand to be fitted.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Bravo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.